bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 RA Test Mode For BMW Car Radio (Bavaria C Reverse III)|Page 2481 > < 2 RA Test Mode For BMW Car Radio (Bavaria C Reverse RDS)|Page 2479
Page 1
background image

65 99 ...

Test mode for BMW car radio (Bavaria C Reverse III)

The device "Bavaria C Reverse III

©

 has a test mode with which various device-internal items of information can be

displayed and various operating modes can be set.

Starting Test Mode:

Press keys "2" and "5" simultaneously while switching the radio on. A capital "S" appears in the display. 

This service mode is abandoned by switching the radio on and off once.

Changing increase in volume when traffic information is broadcast

Press the "VF" button for approx. 4 seconds until a "0" appears in the display. The station will be a little louder. With

search run button, volume can be raised in 5 steps.

The factory setting is "0".

The regulating range amounts to 

±

 6,25 dB.

This mode is abandoned by pressing "VF" key again. The test mode remains activated.

Adjusting roadspeed-dependent volume (GAL)

Press station button "3" for approx. 4 seconds until a "2" appears in the display. This value can be changed by using
the automatic tuning rocker.

The factory setting is "2".

Regulation range:

"1" : weak increase

"2" : medium increase

"3" : strong increase

RA  Test mode for BMW car radio (Bavaria C Reverse III)

BMW AG - TIS

11.02.2013  11:35

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

3 RA Test Mode For BMW Car Radio (Bavaria C Reverse III)|Page 2481 > < 2 RA Test Mode For BMW Car Radio (Bavaria C Reverse RDS)|Page 2479