3 Series E36 Z3 (M54) ROADST
11 40 000
Checking engine oil pressure
Special tools required:
•
11 4 050
•
13 3 061
•
13 3 063
•
13 6 051
•
13 6 054
Note:
For engine oil pressure to be checked, oil pressure switch must
be removed and special tools must be installed and connected.
To avoid an excess discharge of oil when removing oil pressure
switch:
Unscrew oil filter cap; the engine oil flows out of the oil filter
housing into the oil sump.
Installation:
Replace sealing ring.
Tightening torque 11 42 2AZ
Remove oil pressure switch.
Installation:
Tightening torque 12 61 1AZ
Install special tool 11 4 050 with sealing ring (1) in place of oil
pressure switch.
RA Checking engine oil pressure
BMW AG - TIS
11.02.2013 01:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -