bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

1 RA Replacing Battery Positive Lead Z3 M54 (between Starter Motor And B- Support Poi|Page 627 > < 2 RA Replacing Solenoid Switch
Page 1
background image

12 42 510

Replacing battery positive lead Z3 M54
(between starter motor and B+ support point) 

Read fault memory. Switch off ignition.

Observe safety instructions for handling vehicle battery.

Remove front underbody protection.

Observe instructions for disconnecting and connecting battery.

Disconnect battery negative lead from battery and lay to one side.

Unclip battery positive lead by undoing clips.

Feed battery positive lead (1) out of cable duct.

Fold cover cap (1) down.

RA  Replacing battery positive lead Z3 M54 (between starter motor and B+ support poi

BMW AG - TIS

11.02.2013  02:09

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

1 RA Replacing Battery Positive Lead Z3 M54 (between Starter Motor And B- Support Poi|Page 627 > < 2 RA Replacing Solenoid Switch