3 Series E36 Z3 (M54) ROADST
M54 E46/E53 only:
Remove complete intake hose (between intake filter housing and
throttle assembly).
M54 E60/E61/E65/E66 only:
Remove intake hose.
M52TU and M54:
Unfasten following plug connections:
(1)
Resonance flap
(2)
Idle speed control valve
Installation location:
Idle actuator (2) is fitted below intake air manifold, directly above
throttle (1).
Release screw (1) on cable duct mounting.
Release screws (2) on holder of idle actuator (3).
Remove idle actuator with holder from intake air manifold.
RA Replacing idle speed control valve (M52TU, M54)
BMW AG - TIS
11.02.2013 02:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -