bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

2 RA Replacing Intake Hose (between Connecting Piece And Throttle Assembly) (M54)|Page 672 > < 1 RA Removing And Installing_sealing Throttle Assembly (M54)|Page 670
Page 1
background image

13 54 251

Replacing intake hose (between connecting
piece and throttle assembly) (M54)

Switch off ignition.

E53 only:

Detach vacuum lines (1 and 2) from intake hose (3).

Z3, E39 and E53:

Release clips (1).

Pull intake hose (2) out of connecting piece.

Release screw.

Remove suction jet pump (1) from intake air manifold.

RA  Replacing intake hose (between connecting piece and throttle assembly) (M54)

BMW AG - TIS

11.02.2013  02:22

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

2 RA Replacing Intake Hose (between Connecting Piece And Throttle Assembly) (M54)|Page 672 > < 1 RA Removing And Installing_sealing Throttle Assembly (M54)|Page 670