3 Series E36 Z3 (M54) ROADST
13 71 000
Removing and installing intake filter housing
(M54)
Turn off ignition.
Detach screw connection of intake filter housing on body.
Unlock plug (1) and detach from air-mass flow sensor.
Unclip hose (2).
Release clips (3).
Remove intake filter housing.
Installation:
Fit guide pin (2) on rubber mount (1).
Insert intake pipe (3) in intake fitting (4).
RA Removing and installing intake filter housing (M54)
BMW AG - TIS
11.02.2013 02:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -