3 Series E36 Z3 (M54) ROADST
16 14 600
Replacing tank pressure sensor (Z3)
Remove fuel tank,
refer to 16 11 030.
Release and disconnect plug connector (1), open hose clip (2)
and pull off hose.
Unfasten screws (3) and pull out tank pressure sensor.
Installation:
Ensure proper locking of plug connector. Replace hose clip.
RA Replacing tank pressure sensor (Z3)
BMW AG - TIS
11.02.2013 02:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
