3 Series E36 Z3 (M54) ROADST
7.
Pour coolant into coolant expansion tank up to max. cold fill
level. Marking (2) is then level with upper edge of coolant
expansion tank.
8.
Close coolant expansion tank.
9.
Allow engine to warm up until thermostat opens.
Allow engine to cool down before checking coolant level.
Coolant temperature must not exceed 30
°
C. If ambient
temperature exceeds 30
°
C, allow engine to cool down at
least to ambient temperature.
Carefully open sealing cap and check fluid level. Fluid level is
O.K. when top edge of coolant expansion tank lies between
both markings (1 and 2) on float needle.
-
Minimum cold fill level:
Top edge of coolant expansion tank is level with marking (1)
-
Maximum cold fill level:
Top edge of coolant expansion tank is level with marking (2)
If necessary, top up coolant.
Note:
The tank mark indicates the fluid level at approx. 20
°
C.
Use only recommended coolant.
RA Removing and installing/replacing coolant expansion tank Z3/M54/S54
BMW AG - TIS
11.02.2013 03:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
