3 Series E36 Z3 (M54) ROADST
21 00 010
Checking clutch drive plate for wear
Note:
Wear inspection is no longer necessary on the following
vehicles:
-
E38 M62 from 9.96
-
E39 M62
Remove clutch slave cylinder (pressure line remains connected),
refer to 21 52 510
Note:
Relieve clutch slave cylinder slowly, as otherwise the clutch
slave cylinder may suck in air via the sealing sleeve.
Apply special tool 21 2 080 so that scale assigned to the
transmission type can be read from underneath.
Note:
Determine transmission type,
refer to Technical Data Transmission Assignment MG 23
Measuring scale B:
4 cylinders without ZMS (dual-mass flywheel)
Transmission S5D 200G
Measuring scale D+E:
Transmission S6S 420G
Transmission S6S 560G
Measuring scale B+C:
6 cylinders and all 4 cylinders with ZMS (dual-mass flywheel)
Transmission S5D 200G
Transmission S5D 250G
Transmission S5D 260Z
Transmission S5D 310Z
Transmission S5D 320Z
RA Checking clutch drive plate for wear
BMW AG - TIS
11.02.2013 03:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -