bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

13 RA Removing And Installing Automatic Transmission (A4S 270R_ 310R)|Page 1004 > < 12 RA Adjusting Selector Lever (A5S 360R _ 390R, A4S 200R, 6HP26Z_19Z)
Page 1
background image

24 00 025

Removing and installing automatic
transmission (A4S 270R/ 310R)

Caution!

On vehicles with ASC+T, the throttle body (ASC+T) and/or
the expansion tank on the master brake cylinder can
become damaged when the transmission is lowered.

Remove throttle body (ASC+T),

refer to 13 54 060.

Disconnect battery,

refer to instructions on disconnecting and connecting up
battery in MG 12.

Removing complete exhaust system, 

refer to 18 00 020.

Engine M51:

Remove splash guards at front, middle and rear.

Remove heat shield (1).

Version with Oil Filler Pipe: Drain off fluid.

Caution!

Never reuse drained oil.

Caution!

Clean oil cooler and pipes with compressed air and flush
twice with ATF if the transmission is faulty.

RA  Removing and installing automatic transmission (A4S 270R/ 310R)

BMW AG - TIS

11.02.2013  04:01

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

13 RA Removing And Installing Automatic Transmission (A4S 270R_ 310R)|Page 1004 > < 12 RA Adjusting Selector Lever (A5S 360R _ 390R, A4S 200R, 6HP26Z_19Z)