3 Series E36 Z3 (M54) ROADST
Release screw from interlock cable.
Tightening torque, 25 16 5AZ.
Release screws and lift out shift tower a little.
Tightening torque, 25 16 3AZ.
Unhook interlock cable.
Remove shift tower with cable.
Installation:
Check/adjust interlock/shiftlock function.
Installation:
Insert rubber seal (1) of shift cable (2) into cardan tunnel.
RA Removing and installing / replacing shift tower (Steptronic)
BMW AG - TIS
11.02.2013 04:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
