3 Series E36 Z3 (M54) ROADST
33 41 151
Replacing left or right wheel bearing on rear
axle shaft (Z3 2.8)
Remove output shaft,
refer to 33 21 000.
Remove brake disk,
refer to 34 21 320.
Secure special tool 33 2 116 to drive flange with wheel nuts.
Drive out drive flange with special tool 33 4 201 / 202 / 203.
If necessary, pull off inner bearing race with special tool
33 4 090 / 33 1 307.
Note:
Refer also to 33 41 ... Removing inner wheel bearing race.
Installation:
Pull in drive flange using special tool 33 4 041/042/045/048.
RA Replacing left or right wheel bearing on rear axle shaft (Z3 2.8)
BMW AG - TIS
11.02.2013 06:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -