3 Series E36 Z3 (M54) ROADST
Grind down welded surfaces and, if necessary, open up any
blocked bores.
Clean contact surfaces on brackets (1) and (2).
Adjust brackets (1) and (2) to fit, secure and grind down.
Grind down welded surfaces.
Tin out and grind down contact surfaces.
RA Replacing right engine support (partial replacement ahead of front axle) (Z3)
BMW AG - TIS
11.02.2013 08:17
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -