3 Series E36 Z3 (M54) ROADST
Spare trunk floor without trunk floor beam.
1 = direction of travel
Note:
View of spare trunk floor without trunk floor beam from underbody
area.
Adjust spare trunk floor with straightening angle set, reworking
connection points if necessary.
Remove spare trunk floor.
Manufacture reinforcement plate for connection point in left side
member from scrap sheet metal.
Width approx. 60 mm.
Manufacture reinforcement plate for connection point in right side
member from scrap sheet metal.
Width approx. 60 mm.
Coat reinforcement plate for connection point between left and
right side members with zinc dust paint.
RA Replacing complete rear trunk floor (tail panel removed) (Z3)
BMW AG - TIS
11.02.2013 08:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -