3 Series E36 Z3 (M54) ROADST
Expose and clean connection point between top of windshield and
wind cowl panel.
Drill off spot welding.
Drill out welding points outside windshield.
Expose connection point at bottom of windshield.
Remove cowl panel.
Straighten and grind joint surfaces.
RA Replacing left or right sides of windshield (without finisher strip on windshiel
BMW AG - TIS
11.02.2013 08:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
