3 Series E36 Z3 (M54) ROADST
Lift out expanding rivets (1) and remove bumper carrier (2).
Version with headlight cleaning system:
If necessary, unfasten expanding rivets (1) and screws (2).
Remove support member (3) with hoses, replace faulty cable ties
(4) if necessary.
Note:
The operation "Removing center section of front bumper
(support beam)" ends here.
Unfasten retaining washers and remove air grill.
Lift cover (2) off towing eye and unfasten catch band.
RA Replacing front bumper (Z3 Roadster, Z3 Coupé)
BMW AG - TIS
11.02.2013 08:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -