3 Series E36 Z3 (M54) ROADST
Note:
The operation "Removing outside handle from left or right
front door" ends here.
Only for replacement of lock cylinder:
Insert key (1) in lock cylinder (3).
Drive out pin (2) using much and press out lock cylinder (3) using
the vehicle key (1) (do not pull on the key (1)).
Note:
If the key (1) is removed from the lock cylinder (2) during
disassembly, the encoding plates (3) drop out.
Installation:
When installed, the tip (4) is at the top.
Note:
The operation "Removing and installing/replacing complete
lock cylinder on left or right front door" ends here.
RA Removing and installing/replacing outside handle on front left or right door (Z3
BMW AG - TIS
11.02.2013 09:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -