3 Series E36 Z3 (M54) ROADST
54 31 030
Removing and installing/replacing roof liner
in convertible top (Z3 Roadster)
Open convertible top.
Unfasten screws (1).
Remove securing rail (2) from plastic retainer.
Installation:
Edges of securing rail (2) must be located under convertible
top seal (window guide).
Pull convertible top seal (1) out of securing rail.
Note:
Before releasing screws (1), make a note of the number of
shims (2) (if fitted) since they must be reinstalled in the same
positions (wind noises, leaks).
Remove screws (1 and 2). Remove securing rail of convertible top
seal.
Installation:
Mark screw positions so that the securing rail can be installed
in the same position.
Note:
Do not release the screw for the closure base plate, otherwise
the setting will be altered.
RA Removing and installing/replacing roof liner in convertible top (Z3 Roadster)
BMW AG - TIS
11.02.2013 10:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
