3 Series E36 Z3 (M54) ROADST
61 61 100
Removing and installing/replacing both
windshield wiper arms
Detach caps.
Unscrew left and right nuts.
Installation:
Tightening torque, 61 61 10AZ
Fold up wiper arms up to end position and detach from drive shaft.
Adjusting dimensions of wiper arms:
Reference points are the mountings of the wiper blades on the
wiper arms to the sealing lip of the cowl panel.
A = 45 mm
B = 25 mm
RA Removing and installing/replacing both windshield wiper arms
BMW AG - TIS
11.02.2013 11:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
