3 Series E36 Z3 (M54) ROADST
63 10
Headlight adjustment, RHD/LHD vehicles
Z3
When crossing the border into countries where vehicles
drive on the opposite side of the road to the country in
which a vehicle is licensed, the asymmetric wedge on the
low-beam headlight must be covered.
Caution!
To do so, use only genuine strip supplied by BMW because
the reflector is made from plastic and strips with unsuitable
glue could damage the reflector. It should be possible to
remove the genuine strip without leaving glue residues.
If there are still glue residues, they may only be removed with
the cleaning cloth provided or with pure alcohol. Do not under
any circumstances use solvents (e.g. paint thinner). This can
damage the plastic by discolouring the lens.
Left headlights in direction of travel:
Marking angles are provided on the reflector.
RA Headlight adjustment, RHD/LHD vehicles
BMW AG - TIS
11.02.2013 11:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
