3 Series E36 Z3 (M54) ROADST
64 52 061
Replacing compressor clutch (for Seiki
compressor)
Removing compressor,
refer to 64 52
Grip drive plate with special tool 64 5 020 and unfasten screw
(1). Remove drive plate.
Installation:
Check for correct clearance A (0.5 ... 0.8 mm) between drive
plate and pulley. If necessary, adjust using shims.
Spread and remove circlip.
RA Replacing compressor clutch (for Seiki compressor)
BMW AG - TIS
11.02.2013 11:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
