3 Series E46 316Ci (N45) COUPE
Fit special tool 11 7 251 on exhaust camshaft.
Turn back special tool 11 7 253 .
Hold inlet camshaft with special tool 11 7 251 so that it rests
without a gap on cylinder head.
Insert screws and tighten down special tool 11 7 251 on
cylinder head.
Tighten down special tool 11 7 253 by hand until it is supported
on special tool 11 7 252 .
Insert screw and tighten down special tool 11 7 252 on cylinder
head.
Remove chain tensioning piston.
RA Adjusting camshaft timing (N40 / N45)
BMW AG - TIS
18.01.2013 19:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -