3 Series E46 316Ci (N45) COUPE
Remove special tool 11 7 260 .
Relieve tension on special tool 11 9 340 and remove.
Note:
For the timing check described below, the original chain tensioner
must be installed.
Install chain tensioning piston.
Note:
The timing is correctly adjusted when special tool 11 7 252
rests flat on the cylinder head or protrudes by up to 0.5 mm to
the exhaust side.
Note:
The timing is correctly adjusted when special tool 11 7 251
rests flat on the cylinder head or protrudes by up to 1.0 mm to
the exhaust side.
Remove all special tools.
Assemble engine.
RA Adjusting camshaft timing (N40 / N45)
BMW AG - TIS
18.01.2013 19:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -