3 Series E46 316Ci (N45) COUPE
Tighten down screw (1) of exhaust adjustment unit.
Tightening torque 11 36 16AZ
.
Tighten down screw (2) of inlet adjustment unit.
Tightening torque 11 36 16AZ
.
Remove special tool 11 7 260 .
Relieve tension on special tool 11 9 340 and remove.
RA Removing and installing/replacing inlet and exhaust adjustment units (N40 / N45)
BMW AG - TIS
18.01.2013 19:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 8 -
