3 Series E46 316Ci (N45) COUPE
Release screw (1) on holder of guide tube.
Unclip vacuum line from holder.
Remove guide tube by turning clockwise.
Installation:
-
Remove sealing ring from oil sump.
-
Coat new sealing ring (1) with antiseize compound and push
onto guide tube (2).
-
Insert guide tube (2) into oil sump.
Assemble engine.
Check engine oil level, top up if necessary
RA Removing and installing/sealing guide tube for oil dipstick (N40 / N42 / N45)
BMW AG - TIS
18.01.2013 19:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
