3 Series E46 316Ci (N45) COUPE
Fit special tool 21 2 170 and tighten down at knurled screw (1).
Screw in spindle (1) until diaphragm spring (2) is tensioned up to
stop.
Important!
Handle clutch plate with care, do not touch surfaces of friction
linings.
Install clutch plate in correct position.
Pay attention to text "engine end" / "transmission side".
Center clutch plate (1) with special tool 21 2 142 .
Note:
special tool 21 2 250
E46 from 09/03 N40/42/45/46
RA Removing and installing or replacing clutch (SAC 228 / 4 cyl. without M47TUE)
BMW AG - TIS
18.01.2013 19:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -