3 Series E46 316Ci (N45) COUPE
Important!
If special tool 21 2 190 cannot be removed from SAC
clutch, proceed as follows:
-
Fit special tool 21 2 170 on SAC clutch and secure.
-
Screw in spindle up to diaphragm spring.
-
Screw in spindle approx. 1 turn over contact pressure of
diaphragm spring.
-
Remove special tool 21 2 190 from SAC clutch.
-
Remove special tools 21 2 170 and 21 2 190 from SAC
clutch.
Withdraw special tool 21 2 142 from clutch plate with aid of
accompanying screw (1).
Note:
special tool 21 2 250
E46 from 09/03 N40/42/45/46
Installing removed SAC clutch with new clutch plate:
Important!
Before installing an SAC clutch which has been in service with
a new clutch plate: always reset adjustment ring in new
position.
RA Removing and installing or replacing clutch (SAC 228 / 4 cyl. without M47TUE)
BMW AG - TIS
18.01.2013 19:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -