3 Series E46 316Ci (N45) COUPE
Installing new SAC:
Important!
Handle clutch plate with care, do not touch surfaces of friction
linings.
Install clutch plate (1) in correct position.
Pay attention to text "engine end" / "transmission side".
Center clutch plate (1) with special tool 21 2 142 .
Note:
special tool 21 2 250
E46 from 09/03 N40/42/45/46
Push SAC clutch onto dowel pins (1) located in flywheel and
screw down.
Tightening torque 21 21 1AZ
.
RA Removing and installing or replacing clutch (SAC 228 / 4 cyl. without M47TUE)
BMW AG - TIS
18.01.2013 19:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 12 -
