3 Series E46 316Ci (N45) COUPE
34 33 505
Removing and installing/replacing brake unit
(MK60)
DSC (Dynamic Stability Control)
Note:
General Information.
After completing work:
Bleed brake system with DSC.
Remove brake master cylinder for DSC (MK60).
Remove DSC hydraulic unit (MK60).
Remove brake pedal.
Unscrew nuts (1).
Installation:
Replace self-locking nuts.
Tightening torque, 34 33 12AZ.
Note:
Do not use any force when removing and installing the brake unit;
the brake unit can be damaged under certain circumstances.
Carefully remove brake unit (1) from bulkhead and tilt out in
direction of engine.
RA Removing and installing/replacing brake unit (MK60)
BMW AG - TIS
18.01.2013 21:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
