3 Series E46 316Ci (N45) COUPE
At connection point of B-pillar reinforcement, arrange individual
welding spots so tightly as to create an enclosed seam.
Locate welding spots in a way which prevents distortion caused by
heat elongation. Ensure that welded areas have cooled down
sufficiently.
Danger of distortion!
Important!
Combustible foam in welding area!
Avoid overheating.
Extract vapours.
At C-pillar connection, set spots close enough together to create
an enclosed seam.
Locate welding spots in a way which prevents distortion caused by
heat elongation. Ensure that welded areas have cooled down
sufficiently.
Danger of distortion!
Important!
Combustible foam in welding area!
Avoid overheating.
Extract vapours.
RA Replacing rear left side panel (partial replacement, C-pillar) (E46 Coupé)
BMW AG - TIS
18.01.2013 22:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 13 -
