3 Series E46 316Ci (N45) COUPE
51 11 001
Replacing front bumper (Coupé)
Remove complete front bumper,
refer to 51 11 000.
Replace base for license plate,
refer to 51 11 158.
Replacing center section (support member) of front bumper:
Detach mucket (1) from bumper (2).
Release expansion rivet (1).
Release blind rivets (2).
Lever out catches (3) and remove bumper carrier (4) towards rear.
Replacement only (bumper center section):
If necessary, release nuts (1) on left/right and remove fanfare (2)
from bumper center section (3).
RA Replacing front bumper (Coupé)
BMW AG - TIS
18.01.2013 22:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -