3 Series E46 316Ci (N45) COUPE
51 11 050
Removing and installing/replacing carrier for
front bumper trim (M3 / lightweight design)
Note:
Refer to KSD CD for details of preliminary tasks.
Only on right side:
Release screw (1) for washer reservoir.
Release screws (1) and pull right carrier (2) towards front
slightly.
Installation:
Observe tightening torque, 51 11 4AZ
.
If necessary, release metal screws (1) on left and right.
Note:
Metal screws are omitted for replacement.
RA Removing and installing/replacing carrier for front bumper trim (M3 / lightweigh
BMW AG - TIS
18.01.2013 22:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -