3 Series E46 316Ci (N45) COUPE
-
the pins must have a diameter of
6.0 mm (always measure)
Replacing clips (Hutfix) on instrument panel:
A
Use screwdriver to turn clip (1) through approx. 30
°
to left
B
Lever out clip (1) from below
Installation:
Retainers (1) on clip (2) must not be damaged.
Do not damage support (3) in instrument panel (4).
Installation:
A
Insert clip (1) from above and snap into place at bottom
Use screwdriver to turn clip (1) through approx. 30
°
to right
B
Clip (1) in end position
Decorative strip on light switch:
Caution!
Carefully unclip decorative strip with two special tools
00 9 321 (fishbone) (risk of damage).
Insert special tool 00 9 321 (fishbone) at side and with second
special tool 00 9 321 next to retaining pin,
refer to next work step,
unclip decorative strip (1).
RA Replacing a clipped-in trim (decorative strip on panel for instrument panel, fro
BMW AG - TIS
18.01.2013 22:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -