Removing and Installing Front Door Trim Panel (Coupé, Convertible)
Lever out airbag emblem (1) with special tool 00 9 317 (trim
panel wedge).
Release underlying screw.
Installation:
Tightening torque, 51 41 1AZ.
Unfasten screws (2).
Installation:
Tightening torque, 51 41 2AZ.
Caution!
Replace damaged screws and nuts.
Unclip clips (1) of door trim panel with special tool 00 9 317
(trim panel wedge).
Carefully unclip door trim panel (1) at top with special tool
00 9 317 (trim panel wedge).
Feed door trim panel (1) out of unlocking knob (2).
Unhook Bowden cable for release lever:
-
Tighten release lever (1).
-
Lever out lock (2).
-
Remove Bowden cable (3) towards rear/top.
Installation:
Press unlocking lever (1) for installation fully on door trim panel.
RA Removing and installing front left or right door trim panel (coupé, convertible)
BMW AG - TIS
18.01.2013 22:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
