3 Series E46 316Ci (N45) COUPE
67 66 010
Removing and installing/replacing lumbar
support drive mechanism on front seat, left or
right
Necessary preliminary tasks:
•
Remove rear panel on front seat backrest
E53 comfort seat:
•
Remove rear panel at bottom
Detach backrest cover (1) in direction of arrow from backrest
frame (2).
Disconnect plug connection (1).
Detach transparent hose (2) from valve housing (3).
Note:
If necessary, gently heat transparent hose (2) if firmly seated.
If necessary, detach fabric adhesive tape (4).
Detach drive unit for lumbar support (5) with jacket in direction of
arrow.
RA Removing and installing/replacing lumbar support drive mechanism on front seat,
BMW AG - TIS
19.01.2013 01:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
