3 Series E46 316i (M43TU) SAL
Connect up special tool 61 3 050 to terminal 87b and
terminal 30.
Operate button for approx. 10 sec and read off delivery pressure
at DIS Tester.
Technical Data for fuel pump, refer to MG16.
Further procedure for checks,
refer to 13 31 ... Information on fuel pressure check.
Note:
Removing special tool kit 13 5 220:
-
Switch off engine.
-
Screw out check valve again fully.
-
Remove special tool kit 13 5 220 from pressure regulator
housing.
-
Catch and dispose of escaping fuel.
-
Interrogate fault memory of DME control module. Check
stored fault messages. Rectify faults, clear fault memory.
RA Checking fuel pump delivery pressure (M43TU)
BMW AG - TIS
19.01.2013 11:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -