3 Series E46 316i (N40) SAL
11 13 000
Removing and installing, sealing or replacing
oil sump (N40/N42/N45/N46)
Necessary preliminary tasks:
•
Remove front splash guard.
•
Drain engine oil.
•
Secure engine in installation position.
•
Remove oil dipstick guide tube.
•
Unlock and detach plug connection to oil level sensor.
•
Unlock and detach plug connection to chassis and
suspension sensor.
There is no need to perform a front axle alignment check.
Cut through cable tie (1).
Unscrew cover plate (2) from transmission.
Release screws (1 and 2), remove guide pulley (3).
RA Removing and installing, sealing or replacing oil sump (N40/N42/N45/N46)
BMW AG - TIS
20.01.2013 03:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
