3 Series E46 316i (N40) SAL
11 23 010
Removing and installing or replacing
vibration damper (N40/N42/N45/N46)
Necessary preliminary tasks:
•
Remove alternator drive belt.
Release screws and remove vibration damper (1).
Installation:
Fit vibration damper (1) on crankshaft hub, insert and tighten
down screws.
Tightening torque 11 23 3AZ
.
RA Removing and installing or replacing vibration damper (N40/N42/N45/N46)
BMW AG - TIS
20.01.2013 03:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -