3 Series E46 316i (N40) SAL
Place special tool 11 7 252 on inlet camshaft and check timing.
Note:
The timing is correctly adjusted when special tool 11 7 252
rests flat on the cylinder head or protrudes by up to 0.5 mm to
the exhaust side.
Turn back special tool 11 7 253 .
Place special tool 11 7 251 on exhaust camshaft and check
timing.
Note:
The timing is correctly adjusted when special tool 11 7 251
rests flat on the cylinder head or protrudes by up to 1.0 mm to
the exhaust side.
If necessary, adjust camshaft timing.
Clip in oil line (2).
Insert screw (1) and tighten down.
Remove all special tools.
Assemble engine.
RA Checking camshaft timing (N40 / N45)
BMW AG - TIS
20.01.2013 03:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -