3 Series E46 316i (N40) SAL
Insert screws and tighten down special tool 11 7 251 on
cylinder head.
Tighten down special tool 11 7 253 by hand until it is supported
on special tool 11 7 252 .
Insert screw and tighten down special tool 11 7 252 on cylinder
head.
Assemble engine.
RA Removing and installing/replacing exhaust camshaft (N40 / N45)
BMW AG - TIS
20.01.2013 03:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -