3 Series E46 316i (N40) SAL
Remove protective cap from compressed air connection (1).
Blow fuel back into tank with a short blast of compressed air (max.
3 bar) at compressed air connection (1).
Unlock fuel line (2) and detach from injection pipe (3).
Seal off fuel hose (1) with special tool 13 5 281 .
Installation:
Check sealing ring in fuel hose and sealing surface on
injection pipe for damage; replace components if necessary.
Coat sealing ring for installation with antiseize agent.
Loosen hose clamp (1).
Detach fuel line (2) from fuel filter.
Remove fuel line (2) from holders.
RA Removing and installing/replacing fuel feed line (N42 / N40)
BMW AG - TIS
20.01.2013 03:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -