3 Series E46 316i (N40) SAL
13 62 560
Removing and installing/replacing air-mass
flow sensor (N42 / N40)
Turn off ignition.
Remove intake hose.
Release screws.
Withdraw air-mass flow sensor (1) from intake filter housing (2).
Note:
Interrogate fault memory of DME control unit.
Check stored fault messages.
Rectify faults.
Then clear fault memory.
RA Removing and installing/replacing air-mass flow sensor (N42 / N40)
BMW AG - TIS
20.01.2013 03:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -