3 Series E46 316i (N40) SAL
Note:
For purposes of clarity, this work step is shown without the intake
air manifold.
Unlock plug connection and detach.
Unscrew coolant temperature sensor (1).
Tightening torque 13 62 2AZ
.
After completing tasks, top up coolant, vent cooling system and
check for water leaks.
Approved antifreeze and corrosion inhibitor.
Note:
Check stored fault messages.
Now clear the fault memory.
RA Replacing coolant temperature sensor (N40, N42, N43, N46, N45)
BMW AG - TIS
20.01.2013 03:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -