3 Series E46 316i (N42) SAL
17 11 100
Removing and installing/replacing coolant
expansion tank (M52TU, M54, N42, N40)
Warning!
Danger of scalding!
Only perform this work after engine has cooled down.
Follow instructions for working on cooling system.
Remove intake filter housing.
Remove front underbody protection.
Drain coolant from radiator.
Unfasten plug connection (1) and disconnect.
Pull out lock (2).
When replacing coolant expansion tank:
Unlock coolant level sensor (1) by turning and pull out of coolant
expansion tank.
RA Removing and installing/replacing coolant expansion tank (M52TU, M54, N42, N40)
BMW AG - TIS
20.01.2013 19:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -