bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

ABOUT US
5 RA Removing And Installing_replacing Cooling Loop For Power Steering > < 4 RA Removing And Installing_replacing Coolant Expansion Tank (M52TU, M54, N42, N40)

3 Series E46 316i (N42) SAL

Page 2
background image

Pull locks (1 and 2) upwards and detach coolant hose from
radiator/coolant expansion tank.

Pull lock (1) upwards and detach coolant hose from coolant
expansion tank.

Pull coolant expansion tank a little out of retaining plate and lower
connection piece. Then tilt expansion tank to rear and remove.

Installation:

Check O-rings. Under no circumstances coat O-rings with
antiseize agent prior to installation.

Retaining lug must engage in opening in retaining plate.

RA  Removing and installing/replacing coolant expansion tank (M52TU, M54, N42, N40)

BMW AG - TIS

20.01.2013  19:42

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

5 RA Removing And Installing_replacing Cooling Loop For Power Steering > < 4 RA Removing And Installing_replacing Coolant Expansion Tank (M52TU, M54, N42, N40)