3 Series E46 316i (N42) SAL
63 12 860
Replacing control unit for left xenon headlight
(saloon/sedan, touring)
Warning!
Version with xenon headlights: Danger to life due to high
voltage! Therefore disconnect all components from voltage
supply before removal.
Work on the entire xenon lighting system (ignition unit, control
unit and lamp) may only be carried out by specialist
personnel.
Remove left headlight (xenon headlight).
Up to 09/2001:
Loosen screws (1).
Pull xenon headlight control unit holder with control unit for xenon
headlight (2) in direction of arrow out of guides and place to one
side.
Installation:
Ensure correct cable routing.
Loosen screws (1).
Detach control unit for xenon headlight (3) from holder of control
unit for xenon headlight (2) and remove.
RA Replacing control unit for left xenon headlight (saloon/sedan, touring)
BMW AG - TIS
21.01.2013 00:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
