3 Series E46 316i (N42) TOUR
Remove intermediate levers (1) and store in neat order.
Relieve tension on knurled screw (2) on special tool 11 9 301 .
Release screw (1) and remove special tool 11 9 301 .
Release special tool 11 9 303 .
Remove special tool 11 9 302 .
Lift out inlet camshaft (1).
RA Removing and installing/replacing inlet camshaft (N42/N46)
BMW AG - TIS
21.01.2013 14:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 9 -
