3 Series E46 316i (N42) TOUR
17 22 010
Removing and installing/replacing heat
exchanger for automatic transmission
Special tools required:
•
17 0 030
Necessary preliminary tasks:
•
After completing this operation, check fluid level in automatic
transmission.
•
Drain off and top up coolant.
Recycling
Catch and dispose of escaping transmission fluid.
Observe country-specific waste-disposal regulations.
Illustrations show E46.
Unlock lines (1 and 2) with special tool
17 0 030 and detach.
Catch and dispose of escaping transmission fluid.
RA Removing and installing/replacing heat exchanger for automatic transmission
BMW AG - TIS
21.01.2013 15:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -