3 Series E46 316i (N42) TOUR
Unfasten screws.
Installation:
Check threads for damage; if necessary, repair with Helicoil thread
inserts.
Replace screws.
Tightening torque 31 12 7AZ
.
Punch-mark centre of control arm.
Composite parts of special tool 00 7 500 .
If necessary, remachine special tool 31 2 151 (see drawing).
RA Removing and installing/replacing both brackets for control arm
BMW AG - TIS
21.01.2013 16:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -