3 Series E46 316i (N42) TOUR
Release expansion rivet (2).
Raise on-board socket at cap (1) and pull out towards middle of
car.
Disconnect plug connections (1) and (2) and remove on-board
socket (2).
Feed out cable (1).
Lever out mount (2) from stud (3) and remove trunk wheel arch
trim (4).
Replacement only:
Lever out speaker frame (1).
Release locking washers (2).
Remove mount (3) for on-board socket from trunk wheel arch
trim (5).
Do not damage guide (4).
RA Removing and installing / replacing left trunk wheel housing trim (touring)
BMW AG - TIS
21.01.2013 19:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
